First of all, don’t panic, your computer still in
safe conditions only. Yeah, you’re that’s true. CPU working fine but your
monitor didn’t show you anything. May be these are the root cause for your
problem. There are
- RAM is not installed properly or problem with RAM.
- VGA Cable
fault.
- BIOS
battery.
Problems with RAM
First unplug all the cables from the CPU and open
the cabinet. Find RAM which is installed in your mother board. Gently remove
the RAM and clean it with pure cotton cloth. Then take the eraser, gently rub
on the RAM pins. Then, again clean it with cotton cloth. Now install RAM in
proper port in your mother board and close the CPU cabinet and plug in all the
cables then turn on your CPU. If it working fine then say “Katham Katham” (Courtesy
Super Star RajiniKanth, BABA Tamil Movie) means finish.
VGA Cable fault
May be everyone’s problem solved in first attempt
right, yes there is second chance. Okay, now check your VGA cable properly. It May
be old or defective one or there may be break or crack in cable. Otherwise check
VGA cable with another PC even there also you don’t get any display then buy
new VGA cable and use with your CPU. If your VGA cable working fine then
problem is not in VGA Cable.
BIOS battery
Please locate BIOS battery in your mother board, its
look like coin. Gently press the needle of the fixer, immediately battery will unplugged.
Clean it with pure cotton cloth. Then check the BIOS battery with the help of
your tongue, if don’t get nervous in your tongue then BIOS battery is faulty
one, replace it. Now your system or PC might working fine 100%. So now you can
say “Katham Katham” (Courtesy Super Star RajiniKanth, BABA Tamil Movie)means
finish.
